Risikomanagement - ISO 14971
Your competent partner for risk management of medical devices and IVDs.
Why choose us?
Trust
Trust is one of our most important values. That is why we attach great importance to the security of your data and exchange them with you only via secure servers in Germany.
Customer satisfaction
Your satisfaction is our highest goal in all projects. A project is only successful for us if you are satisfied!
Reliability
Do you have to solve a critical issue at short notice? Together we can do this - if necessary, even with a night shift. Because we are always available for our customers.
Four reasons for our cooperation
- You benefit from our years of experience in risk management.
- We offer professional services for your medical devices and IVDs.
- Your project success is ensured by our experts.
- Your satisfaction is our most important goal.
Our experts support you in all questions of risk management according to ISO 14971.
Our Services
Do you need support in creating the risk management file? Do you need a process or risk analysis?
With us you are at the right address. Feel free to contact us, if you require another service than listed below.
We create risk management processes and templates for ISO 14971.
We support you in creating the risk management file for your device.
Profit from our experience. We would like to share this with you!
General information about risk management
The ISO 14971 standard was developed specifically for manufacturers of medical devices on the basis of established risk management principles developed over many years. In general, the aim is to identify hazards, assess and evaluate the associated risks, control these risks and monitor the effectiveness of risk management measures.
In addition to the terminology, the standard also describes the process of risk management and that it is to be applied to the entire product life cycle. Through the requirements and explanations described, the document provides some degree of assistance in the implementation or interpretation of the contents.
Sound risk management is an important part of the development of safe medical devices, in vitro diagnostics and accessories. The consideration of risks is not limited to the medical device in use, but is also supplemented by data from production and downstream phases.
RM Guidance TR/ISO 24971
In addition to the contents of the standard, there is a Technical Report, TR/ISO 24971, which contains further explanations of ISO 14971 and offers much more concrete assistance. Within the scope of the updated version of ISO 14971, ISO/TR 24971 will also be updated.
Changes of ISO 14971:2019
- Normative references have been included
- The definitions have been updated
- Greater focus on the benefits of the medical device or IVD
- Clarification regarding the applicability of the standard for all risks associated with medical devices and IVDs
- The RM plan must now include criteria for the determination and acceptance of the overall residual risk
- Updating of requirements regarding the need to disclose residual risks (e.g. for the patient or user)
- The requirements regarding the RM report have been updated
- The link with post-market surveillance was further explained
- Informative annexes have been removed. They are now available in technical report TR/ISO 24971
Risk Management Plan
ISO 14971 requires that activities must be planned. The RM plan must be created for this purpose. This includes, for example, a description of the medical device, responsibilities and authorities, acceptance criteria and the method for assessing the overall risk.
Risk Analysis
The risk analysis contains of (1) the identification of risks related to the device and (2) the analysis of these risks. The identification can by difficult especially in case of new devices or very complex ones. It is therefore necessary to have a product expert within the RM team. When analysis risks, the actual Rm methods are to ne used. For example, a failure mode and effects analysis (FMEA) can be a useful tool in analysis risks. This method provides an overview of the causes leading to a risk and the harms arrising from it.
In general, it is a good start to think about: “What can go wrong with the device?” This helps to identify hazards. Each hazard is linked to a risk which is described by a severity of harm and the probability of occurence of that harm. In case a patient, user or third is exposed to the harm, this is a hazardous situation. A hazardous situation can lead to a harm. But that´s of course not always happening.
When analyzing the risks, it is necessary to keep in mind that a hazardous situation must be present in order to create a harm. That is a good link to risk mitigation. Because if, for example, the hazard you identified is related to a sharp edge and you mitigate by inherently safe design (removal of the sharp edge), no hazardous situation can occur. Thus, no harm will happen.
Risk Control
The possibilities of risk mitigation have not changed with the new version of the standard. As before, it provides the following options which shall be followed in the written order.
- Inherently safe design
- Protective measures in the actual medical device and/or manufacturing process
- Information for safety, such as labeling and instructions for use
The measures are provided in that certain order according to the individual potential of actually mitigating a risk. In general, the measures to be taken for risk mitigations are very specific to each product. One aspect to consider is, that risk mitigation measures may also introduce new risks or even may reduce the benefit of the medical device. Therefore, implemented measures need to be reviewed.
cONTACT US
Goal-oriented Consulting
Getting in touch with us is the first step toward solving regulatory challenges.
Let’s get started today!
Risk Management Report
The RM report addresses the following issues:
- The confirmation that the RM plan has been executed
- The acceptance of the overall residual risk
- Confirmation that adequate methods for collecting data from production and downstream phases are implemented.
The report must be completed before the medical device is commercially distributed.
Why choose us?
Trust
Trust is one of our most important values. That is why we attach great importance to the security of your data and exchange them with you only via secure servers in Germany.
Customer satisfaction
Your satisfaction is our highest goal in all projects. A project is only successful for us if you are satisfied!
Reliability
Do you have to solve a critical issue at short notice? Together we can do this - if necessary, even with a night shift. Because we are always available for our customers.
Request information
Please feel free to contact us with your questions!
One of our consultants will contact you shortly after receiving your inquiry.
Confidentiality and discretion are important to us. Therefore, we will treat your inquiry accordingly, even before entering into a confidentiality agreement.
